Rapid Prototype Company

Your First Choice for
SLA™, SLS™ and Cast Urethane Parts!
      Home       SLA SLS       Secondary Tooling       Support       Links      

RenShape® SL7580

 Durable stereolithography material that simulates ABS.

  • Good combination of durability and rigidity.
  • Outstanding white appearance.
  • Good temperature performance.
  • Excellent for RTV patterns.
  • Excellent side walls and fine features.
  • Durable parts for functional applications.

Properties
Measurement Test Method Value
(90 minute UV post-cured)		 Value
(90 minute UV +
2 hours @ 80ºC thermal post-cured)
Hardness, Shore D ASTM D 2240 84 85
Flexural Modulus
Flexural Strength		 ASTM D 790 2,400 Mpa (340 KSI)
83 Mpa (12,000 PSI)		 2,300 Mpa (330 KSI)
83 Mpa (12,000 PSI)
Tensile Modulus
Tensile Strength
Elongation at Break		 ASTM D 638 2,300 Mpa (330 KSI)
53 Mpa (7,700 PSI)
11%		 2,300 Mpa (330 KSI)
59 Mpa (8,500)
10%
Impact Strength, Notched Izod ASTM D 256 34 J/m (0.6 ft-lbs/in) 34 J/m (0.6 ft-lbs/in)
Heat Deflection Temperature ASTM D 648 @66 PSI
ASTM D 648@264 PSI		 63ºC (145ºF)
52ºC (126ºF)		97ºC (207ºF)
76ºC (169ºF)
Glass Transition (Tg) DMA, E" peak 70ºC (158ºF) 72ºC (162ºF)
Density 1.22 g/cm3
Seller makes no representation, express or implied, including the merchantability or fitness to a particular purpose.  No statements herein are to be construed as inducements to infringe any relative patent.  Under no circumstances shall seller be liable for incidental, consequential or indirect damage for alleged negligence, breach of warranty, strict liability, tort, or contract arising in connection with the product(s).  Buyer's sole remedy and seller's sole liability for any claims shall be buyer's purchase price.  Data and results are based on controlled or lab work and must be confirmed by buyer by testing for its intended conditions of use.  The product(s) has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin or blood is intended or for uses for which implantation within the human body is intended.

Copyright © 2007 - Rapid Prototype Company.     All rights reserved.
All trademarks and logos shown are the property of their respective owners.
4141 N. Atlantic Boulevard, Auburn Hills, MI 48326
Phone:  (248) 391-6600     Fax:  (248) 393-8430
E-mail:  rapid@rpparts.com